Serial Clock Line (Connects to iProg clock line)
iProg Programmer Pinout Guide | PDF | Microcontroller - Scribd
The iProg EEPROM adapter is a useful tool for programming and reading EEPROM chips. For users who need a portable solution, understanding the pinout is crucial for setting up the adapter with various EEPROM chips and microcontrollers. Here's a general overview:
: Enables in-circuit programming (reading the chip while it is still soldered to the circuit board). iprog eeprom adapter pinout portable
with 24C, 93C, or 95C series chips, the pinout follows standard electronic conventions: I2C (e.g., 24C02) : Requires connections to SDA and SCL pins. SPI (e.g., 95080/95160) : Requires MOSI, MISO, SCK, and CS pins. MicroWire (e.g., 93C46) : Requires specific DI, DO, SK, and CS connections. Key Usage Guidelines Power Warning : Most iProg+ versions must only be powered via the 5V USB port
: Powers the memory chip. Ensure the voltage is set correctly (e.g., 2.8V, 3.3V, or 5V) in the software to avoid damage. BLACK (GND) : Common ground connection. GREEN (Data) : Vital transmission lines for data exchange.
What is the printed on the EEPROM? (e.g., 95160, 24C02, 93C46) What automotive module are you currently working on? Are you reading the chip on-board or did you desolder it ? Serial Clock Line (Connects to iProg clock line)
Detailed schematics and pin guides for specialized adapters (like the CAN adapter or RFID adapter) can be found on technical sharing platforms: iProg Programmer Pinout Guide (Scribd) iProg+ CAN Adapter Pinout Guide (Scribd)
: The iProg+ must only be powered via a 5V USB port ; external 12V power supplies should not be used as they can damage the hardware. Adapter Features and Capabilities iProg+ CAN Adapter Pinout Guide | PDF - Scribd
Execute a read command within the iProg software. with 24C, 93C, or 95C series chips, the
If you truly need a "portable" solution, the DIY flying lead approach wins every time.
The iProg+ unit is designed to be powered via the 5V USB port of your laptop. Do not connect an external 12V power supply to the main unit unless explicitly required by a specific script, as this can destroy the internal circuitry.
The iProg+ is a highly versatile automotive diagnostic and programming tool widely favored by technicians for mileage correction, airbag resetting, and immobilizer key programming. One of its most frequently used components is the EEPROM adapter, which allows direct reading and writing of serial memory chips (such as the 24C, 93C, and 95C series).
If you are currently setting up your mobile programming kit, I can help you optimize it. Please let me know:
The circuit board may try to draw power from the iProg+, causing voltage drops.