Unlock Bootloader Using Termux Better <High-Quality>

chmod +x get_token.sh ./get_token.sh --region=REGION --product=PRODUCT --token=TOKEN "ACCOUNT_DATA"

The target phone should now show a "Fastboot" or "Bootloader" screen. 🔓 Step 4: The Unlock Command

Before starting, you complete these steps to avoid permanently damaging (bricking) your device:

Execute the command to push the target phone out of its standard OS into its bootloader interface: adb reboot bootloader Use code with caution.

Back up all critical user data; unlocking the bootloader triggers a mandatory factory reset. unlock bootloader using termux better

mi-fastboot oem-unlock "UNLOCK_TOKEN"

If you see your device ID, you are connected. Now, reboot into the bootloader/fastboot mode: adb reboot bootloader Use code with caution.

An Android device running Android 7.0 or higher with Termux installed. This device must support USB-OTG.

Before starting, gather these:

Unlocking the bootloader allows you to:

Open Termux and update your packages to ensure you have the latest tools. Run the following command: pkg update && pkg upgrade -y Use code with caution. Next, install the Android tools package: pkg install android-tools -y Use code with caution. This package includes both adb and fastboot binaries [5].

Unlocking a bootloader using Termux is a highly effective way to manage device firmware without a PC . This process requires a secondary Android device to act as the "host" and an OTG adapter to connect both phones. Prerequisites A "Host" Phone : The device where you install Termux. The "Target" Phone : The device you want to unlock. OTG Connection

If fastboot commands are not recognized, ensure you are in the correct mode and that android-tools was installed properly. chmod +x get_token

Eliminates the need for Windows, macOS, or Linux computers.

Or simply check if adb sees the target:

Fix: Termux cannot claim ownership of the physical OTG port. Disconnect the cable, flip the direction of the Type-C cable, reconnect, and check your host phone's notification shade to ensure it is set to "Supply Power" or "Data Transfer".