A lightweight, high-performance cross-platform camera capture library with video file playback support, plus Rust bindings.
轻量级、高性能的跨平台相机捕获库，支持视频文件播放，并提供 Rust bindings。
Hardware-accelerated conversion with AVX2, Apple Accelerate, NEON
支持 AVX2、Apple Accelerate、NEON 硬件加速
Pre-built binaries for all supported platforms
所有支持平台的预编译二进制文件
Loading release information...
正在加载版本信息...
Hardware-accelerated pixel format conversion with up to 10x speedup using AVX2, Apple Accelerate, and NEON.
硬件加速的像素格式转换，使用 AVX2、Apple Accelerate 和 NEON 可提升高达 10 倍性能。
No third-party dependencies - uses only system frameworks for maximum portability.
无第三方库依赖，仅使用系统框架，实现最大可移植性。
Native support for Windows dual backends (DirectShow by default, Media Foundation also supported), macOS/iOS (AVFoundation), and Linux (V4L2).
原生支持 Windows 双后端（默认 DirectShow，同时支持 Media Foundation）、macOS/iOS (AVFoundation) 和 Linux (V4L2)。
Support for RGB, BGR, YUV (NV12/I420) with automatic format conversion.
支持 RGB、BGR、YUV（NV12/I420）及自动格式转换。
Both modern C++ API and pure C99 interface for various project integration and language bindings.
同时提供现代 C++ API 和纯 C99 接口，支持各种项目集成和语言绑定。
Comprehensive test suite with 95%+ accuracy validation and 50+ test cases.
完整测试套件，95%+ 精度验证，50+ 测试用例。
DirectShow default + Media Foundation support
MSVC 2019+
AVFoundation
Xcode 11+, macOS 10.13+
AVFoundation
Xcode 11+, iOS 13.0+
V4L2
GCC 7+ / Clang 6+
Right-click VAG_EEPROM_Programmer.exe and select .
is a "mechanic's level" diagnostic tool. It is not for general car enthusiasts but for technicians performing specific electronic repairs like dashboard swaps, key programming, or immobilizer deletion on older VAG vehicles.
Change the designation to an arbitrary setting between COM1 and COM4 (the software often struggles to scan ports assigned higher than COM4).
is a highly specialized, lightweight automotive software tool designed to read, write, and modify non-volatile EEPROM memory inside Volkswagen Group (VAG) vehicles. Targeting classics spanning from 1997 to 2004 —including the Volkswagen Golf Mk4, Passat B5, Audi A3/A4 B5, Skoda Octavia A4, and Seat Leon Mk1—this utility serves as an accessible bridge for advanced module configuration. Unlike complex diagnostic dealer equipment, version 1.20 provides a streamlined, extended window interface to extract security data, clear crash histories, and resolve immobilization roadblocks over simple serial connections. Core Capabilities of Version 1.20 vag eeprom programmer 1.20
Understanding VAG EEPROM Programmer 1.20: A Comprehensive Guide to Volkswagen Audi Group ECU and Dash Calibration
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Warning: Genuine Hex-V2 or CAN-only VCDS cables will not work with this software. 📝 Step-by-Step Usage Guide Right-click VAG_EEPROM_Programmer
What (if any) are you seeing when trying to connect? I can provide troubleshooting steps for your exact setup. Share public link
After an accident, the airbag light stays on. The module’s crash data is stored in EEPROM. The software identifies the crash flag and resets it, saving the customer hundreds of dollars.
Ensure the vehicle ignition is turned entirely ON. If an aftermarket radio is installed, it may be shorting out the K-Line diagnostic wire; temporarily disconnect the aftermarket radio wiring harness and try again. 3. "Unknown Cluster" / "Crypto Found" Change the designation to an arbitrary setting between
The tool operates directly through a vehicle's OBD-II diagnostic port or on a test bench using standard K-Line hardware. Version 1.20 builds upon older legacy iterations (like v1.19g) by expanding visible data lines and integrating native Virtual COM Port (VCP) driver setups.
The software is designed to communicate with and read the EEPROM data from several key modules:
: Common compatible models include the Golf Mk4, Passat B5, Audi A3/A4 (8L/8D), and Octavia A4.
When an instrument cluster fails and must be replaced with a used unit, the odometer reading will not match the vehicle's actual mileage. This software allows users to write the correct mileage to the replacement cluster to maintain legal, accurate service records. 3. Immobilizer Adaptation (Immo On/Off)
: Beyond specialized tasks, it can read and clear standard engine and SRS airbag error codes.
git clone https://github.com/wysaid/CameraCapture.git
cd CameraCapture
./scripts/build_and_install.shinclude(FetchContent)
FetchContent_Declare(ccap
GIT_REPOSITORY https://github.com/wysaid/CameraCapture.git
GIT_TAG main)
FetchContent_MakeAvailable(ccap)
target_link_libraries(your_app PRIVATE ccap::ccap)brew tap wysaid/ccap
brew install ccapcargo add ccap-rs
# Recommended in Cargo.toml:
# ccap = { package = "ccap-rs", version = "<latest>" }find_package(ccap REQUIRED)
target_link_libraries(your_app ccap::ccap)| Platform平台 | Compiler编译器 | Requirements要求 |
|---|---|---|
| Windows | MSVC 2019+ | DirectShow default + Media Foundation support |
| macOS | Xcode 11+ | macOS 10.13+ |
| iOS | Xcode 11+ | iOS 13.0+ |
| Linux | GCC 7+ / Clang 6+ | V4L2 (Linux 2.6+) |
Build Requirements: CMake 3.14+, C++17 (C++ interface), C99 (C interface) 构建要求：CMake 3.14+，C++17（C++ 接口），C99（C 接口）