Becsys5 Installation And: Technical Manual

Press the on the front panel. Note: For free chlorine sensors, calibration should only be performed after the one-hour polarization period has elapsed and compared against a reliable DPD test kit.

The flow cell holds the water sensors. It needs a steady stream of pool water.

for pH control based on user-defined Total Alkalinity (TA) set points. Operation and Maintenance Manual - BECSys5 - Aquafinity becsys5 installation and technical manual

The manual highlights that proper setup is critical to performance. Key steps include: Aquafinity

Configure to log up to 1,000 tags at 1-second intervals. Press the on the front panel

displays alarms on the screen and can send text or email alerts via BECSys Live!.

View data, change set points, and receive alarms from anywhere. It needs a steady stream of pool water

pH, Oxidation-Reduction Potential (ORP), Free Chlorine (amperometric), Total Chlorine, Temperature, and Flow Rate.

Clean the pH and ORP probe tips to remove oils, scale, and biofilm. Re-calibrate the sensors post-cleaning. Verify that the flow switch safety interlock correctly cuts off chemical feed when the sample stream valve is closed.

Plugs into the BNC connector labeled "pH". Twist to lock.

BECSys5 Installation and Technical Manual: The Ultimate Guide