| Error Code | Meaning | Solution | | :--- | :--- | :--- | | | Device not found | Re-insert USB; Run MPALL as Admin | | 0x1084 | Write protect enabled | The controller is locked. Use "Mode 8" (Preformat only) to unlock. | | 0x1026 | Firmware mismatch | Find the correct firmware for your NAND chip. | | 0x2001 | Timeout | The USB drive is too slow. Use a USB 2.0 port. |
: Compatible with a vast array of Phison USB controllers including the PS2251-03, PS2251-67, PS2251-50, PS2251-38, and PS2251-68 .
What specific or code are you getting if you already tried running MPALL? Share public link phison mpall v3700e
: It is often paired with specific binary files (Burner and Firmware) to bypass "disk is write protected" errors or to perform low-level formatting : Using this tool will permanently erase all data
Fixes common issues like "No Media," write-protection, or unreadable partitions by rewriting the drive's firmware. | Error Code | Meaning | Solution |
With the main MPALL window open, click the button on the right side of the interface. MPALL will scan your USB ports. If your controller is supported and recognized, one of the numbered boxes will light up in green or yellow, displaying your drive's details. Step 4: Execute the Flash Process
Save the settings. This will automatically update the MPParam.ini file in your directory. Step 4: Run the Mass Production Process | | 0x2001 | Timeout | The USB drive is too slow
Phison MPALL (Mass Production Alliance) is an official proprietary utility designed for factory-level programming of Phison USB controller chips. The release is a specific version of this software tailored to support a wide range of legacy and modern Phison controllers, including the highly popular PS2251 series.