Weierwei - Vev-3288s Programming Software ((full))

Here's a breakdown of what you can do with this software:

In the software, go to the "Set" or "COM Port" menu and select the correct COM port corresponding to your cable.

When the transfer finishes, the radio will automatically reboot, and your new channels will be ready for use. Troubleshooting Common Connection Errors

The VEV-3288S executable file (usually compatible with Windows XP through Windows 10/11). Step-by-Step Programming Guide 1. Driver Installation Weierwei Vev-3288s Programming Software

Remember these golden rules:

Firmly insert the 2-pin connector into the speaker/microphone jack on the side of the radio. Plug the USB end into your computer.

What is your computer running (Windows 10, 11, Mac)? Do you already have a compatible 2-pin programming cable ? Here's a breakdown of what you can do

The frequency the radio transmits on (this will automatically calculate a standard offset on amateur bands).

Always read from your radio before writing new data to prevent overwriting base calibration settings.

To use the software, you need the following hardware components: Step-by-Step Programming Guide 1

To begin programming, you will need the software, a compatible computer, and the correct physical connections.

Download an older, archived version of the Prolific driver (v3.2.0.0 or older) or upgrade to an FTDI chip cable. Attempting to write VHF data onto a UHF hardware model.

Once you have organized your frequency list, click Do not unplug the cable or turn off the device during this process, as it could corrupt the firmware. Once finished, the radio will typically reboot, and your new settings will be live. Troubleshooting Tips