After installation, the device appears as under Ports (COM & LPT) .
Scan for connected devices to populate your cable’s internal EEPROM configuration profile.
Once Windows identifies the hardware interface cleanly, you must align the system environment so that the tuning application does not crash upon startup. File System Configuration Help with my Galletto 1260 - 2006+ Honda Civic Forum
| Issue | Workaround | |-------|-------------| | Driver may unload after Windows Update | Reinstall using test mode or repeat Step 1. | | Clone devices with different VID/PID | Edit the .inf file: replace VID_FFFF&PID_4000 with actual ID from Device Manager → Details → Hardware Ids. | | Cannot flash certain ECUs | Use legacy Windows XP/7 VM with USB passthrough. | galletto 1260 drivers windows 10 fixed
Your computer will reboot into the blue screen.
If you have tried plugging your Galletto 1260 into a or Windows 11 machine, you have likely encountered the dreaded "Driver is not installed" (Code 28) or "Windows cannot verify the digital signature" (Code 52) errors.
Sometimes, the automatic driver fails to assign the correct FTDI chip. The Galletto 1260 clone cables usually use an FT232R chip, but Windows might incorrectly install a driver for a FT8U2XX . If you encounter this, repeat Phase 3 but manually browse to the official FTDI driver package (available for free from the FTDI chip website). To locate the correct driver: After installation, the device appears as under Ports
Sometimes the issue is the hardware ID (PID) of the cable itself. If your cable isn't recognized at all, its internal EEPROM might have been wiped or corrupted.
To identify, test, and document a working driver solution for the series device (also known as C192, 1260 v3/v4, or clone versions) on Windows 10 (x64) , given that official drivers are unsigned and incompatible with modern driver enforcement.
Locate the text block, change the value back to 6001 , and select Parse . File System Configuration Help with my Galletto 1260
The Galletto software itself (typically New Serial.exe or EOBD1260.exe ) often struggles with Windows 10’s security protocols. Right-click the software executable and select . Go to the Compatibility tab.
Cheers.
: Right-click the device and select Update Driver > Browse my computer for drivers . Direct Windows to the folder where you unzipped the FTDI drivers. 3. Configure Compatibility Mode