: A fallback or general-purpose diagnostic communication port.
This behavior is completely normal for MediaTek devices. The MTK VCOM port only activates for a brief 2 to 5-second window when a powered-off phone is plugged into the PC. If SP Flash Tool or your chosen servicing software is not actively waiting for the connection, the phone will exit flash mode and switch to battery charging mode. Always click or Start in your software before connecting the USB cable. Error Code 10 (Device Cannot Start)
Note: It is perfectly normal for this entry to disappear after a few seconds. The device's preloader mode only remains active momentarily looking for an incoming script from a tool like SP Flash Tool. If no script is detected, the phone automatically drops the port connection to initiate standard battery charging. Troubleshooting Common Errors
Inside the extracted folder, look for an executable file, usually named DriverInstall.exe or SP_Drivers_Setup.exe . Right-click the installation executable. Select .
Open Device Manager, connect the phone, quickly right-click the failing device name, select Update Driver , and manually point Windows to the extracted SP Driver V2.0 folder. Safety and Security Best Practices SP Driver V2.0 Install.rar
: This driver is rarely self-installing. Users typically have to use the Windows Device Manager to "Add legacy hardware" and manually point to the .inf files inside the extracted folder.
Your computer will reboot into a blue menu. Select Troubleshoot . Click on Advanced options , then choose Startup Settings . Click the Restart button located at the bottom right.
Once your computer reboots with driver signatures disabled, follow these steps to install the driver. Step 1: Extract the Archive
Troubleshooting: Manual Installation (If Auto-Install Fails) If SP Flash Tool or your chosen servicing
: Allows your computer to send standard Android Debug Bridge commands when the device is fully booted or in fastboot mode. System Requirements and Compatibility
The Ultimate Guide to Downloading and Installing SP Driver V2.0
Click the tab in the top menu bar and select Add legacy hardware .
: If you must download a file like this, do not extract it immediately. Upload it to a multi-engine scanner like VirusTotal to check for embedded malicious code before running any executable inside it. De geest van Fred Rutten - De Witte Duivel The device's preloader mode only remains active momentarily
Click , browse to your extracted folder, open the Driver subfolder, and select the .inf file corresponding to your operating system architecture (e.g., vcom.inf ).
For developers, advanced users, and technicians, this driver is indispensable. Without it, the SP Flash Tool cannot detect the device when it is connected in download mode, preventing any firmware modifications.
Right-click on SP Driver V2.0 Install.rar and select or Extract to SP Driver V2.0 Install/ .
Fixing software bugs that standard factory resets cannot resolve. Prerequisites Before Installation
: The "SP Driver V2.0 Install.rar" file is likely provided by a hardware manufacturer for installing drivers on a computer. Drivers are software components that allow operating systems to communicate with hardware devices.
Open and expand the Ports (COM & LPT) section. Power off your MediaTek smartphone completely.