The audio input is actually a separate USB audio device. Solution: The Usbtv007 exposes two devices: a video capture and a mono/stereo audio input. Look in Device Manager under "Audio inputs and outputs" – you should see "USB Audio Device". Set this as your default recording device in Windows Sound settings.
Is your capture card plugged into a port? Share public link
: Plug your device into a USB 2.0 port. Open Device Manager , right-click the unidentified device (often labeled usbtv007 or SM-USB 007 ), and choose Properties . Under the Details tab, change the dropdown to Hardware IDs . Ensure it reads USB\VID_1B71&PID_3002 . Usbtv007 Driver Windows 10 64 Bit
How to Install the USBTV007 Driver on Windows 10 (64-Bit) Because the USBTV007 chipset (frequently sold under names like EasyCap , Easier CAP , or SMI Grabber Device ) is a legacy analog video capture hardware item, Microsoft Windows 10 does not automatically deploy native drivers for it.
: Capable of capturing both PAL and NTSC standards at resolutions up to 720x480 . The audio input is actually a separate USB audio device
The Usbtv007 driver is a device driver that allows a Windows 10 system to recognize and interact with a USB TV tuner device. The driver acts as a bridge between the operating system and the device, enabling the system to control the device and receive TV signals.
Related search suggestions (You may ignore these when not needed.) Set this as your default recording device in
Which (e.g., OBS, VLC, Honestech) are you trying to use?
You will need to uninstall the faulty driver, restart, and attempt to find an alternate, signed driver version provided by the community on forums like GitHub or the OBS forums. Conclusion
Note: This must be repeated after each reboot unless you permanently enable Test Mode (run bcdedit -set TESTSIGNING ON as Administrator).
After rebooting normally, the driver should still work. If it fails, you may need to permanently disable Secure Boot in your BIOS (not recommended for security).