Omron M4 Hem 722c1 E Manual !free! -

Note: Replace all four batteries at the same time when the low battery indicator flashes on the screen. Do not mix old and new batteries. Using the AC Adapter (Optional)

: Automatically stores measurement results (typically up to 30 sets for this model series) including systolic, diastolic, and pulse rate. Movement Detection

: Displays a specific symbol if an irregular pulse is detected during the measurement. Cuff Wrapping Guide

The bottom edge of the cuff should be about 1--2 cm above your elbow. Fasten securely with the hook-and-loop fastener. 3. Taking a Measurement Omron m4 hem 722c1 e manual

Pressure: 0 to 299 mmHg / Pulse: 40 to 180 beats per minute.

To ensure your Omron M4 monitor remains accurate and functions for years to come, proper maintenance is key.

Sit quietly in a calm environment for 5 minutes before starting. Note: Replace all four batteries at the same

If the monitor encounters a problem during measurement, the reading will stop, and an error code will display on the screen. Here are the most common codes found in the HEM-722C1-E manual: Error Display Potential Cause How to Fix It Inflation failure or movement.

The Omron M4 runs primarily on battery power, though it also supports an optional AC adapter for wall-outlet power. Battery Installation

Batteries are weak. Replace all four batteries. Movement Detection : Displays a specific symbol if

Prepare a fresh set of 4 "AA" batteries and replace them soon. Batteries are completely dead.

Once the peak inflation is reached, the air pressure will automatically deflate gradually.