Icom Ic-f310 Programming Software Now

For the software, you cannot simply double-click the file in Windows 10. You have two options:

If using a later Windows-based version of the utility, you must run the executable as an Administrator in Windows XP (Service Pack 3) Compatibility Mode.

Once you have the software installed and the cable connected, follow this procedure to program your radio. Icom Ic-f310 Programming Software

The most reliable way to program your radio is by using the proprietary software developed by Icom. However, Icom’s professional radios use a somewhat confusing naming convention for their software and tuning tools. There are two primary official software suites applicable to the IC-F310: and CS-F300/CS-F300S .

| Error Message | Likely Cause | Solution | |---------------|--------------|----------| | "No response from the transceiver" | Wrong COM port, radio off, or cable driver issue | Check Device Manager; reinstall cable driver; try a different USB port. | | "Model information mismatch" | You are using software for IC-F3160 on IC-F310 (or vice versa) | Obtain the exact software version for your radio model. | | "Checksum error" | Corrupted codeplug or incomplete read | Re-read the radio; if persists, the codeplug is damaged (contact a dealer). | | "Frequency out of range" | Entered frequency outside 136–174 MHz | Correct the frequency to within the VHF band limits. | | COM port not showing below COM8 | Software limitation (older versions) | Manually change cable to COM1-COM8 via Windows Device Manager > Advanced settings. | For the software, you cannot simply double-click the

The IC-F310 utilizes an OPC-1122 (or compatible) programming cable. This cable features an RJ-45 modular plug on one end (which plugs into the microphone jack on the front of the radio) and a data connector on the other.

is the gold standard for user-friendly, modern radio programming software. The most reliable way to program your radio

Programming a legacy radio requires specific hardware bridges to connect modern computers to the transceiver’s microphone jack. 1. The Programming Cable