Sharp Atomic Clock Spc373 User Manual Fix -

: Press the °C/°F button to switch between Celsius and Fahrenheit.

The opening sections of the SPC373 manual delineate the core function of the device: the reception of the WWVB signal. This is the atomic clock’s defining feature, and the manual treats it with a reverence bordering on the theological. The text instructs the user to place the clock near a window, away from interference, much like an astrologer seeking a clear view of the stars.

: Open the battery compartment on the back and insert the required batteries (usually 2 AA or AAA, depending on the specific build). Select Time Zone : Press the button to cycle through the four US time zones: (Pacific), (Mountain), (Central), or (Eastern). Signal Search

After setting the date, the clock will exit setting mode automatically. sharp atomic clock spc373 user manual

A small or ALARM indicator will appear on the display screen when the alarm is active. Using the Snooze Feature

Keep the clock at least 3-6 feet away from computers, TVs, or microwaves, as electronic interference can block the signal. 6. Troubleshooting Common Issues The time is off by exactly one or more hours.

The atomic signal is strongest at night. It may take up to 24 hours for the clock to successfully capture the signal and set itself to the exact second. Programming Guide: Manual Settings : Press the °C/°F button to switch between

A: Yes. There is a keyhole slot on the back. Ensure the wall is sturdy. Do not hang on a metal nail near wiring.

The clock failed to receive the signal. Electronic interference from computers, routers, TVs, or metal siding can block the signal. Move the clock to a different room or place it closer to a window facing toward Colorado. The time is exactly one hour off. How do I fix it?

The clock measures the ambient room temperature using internal sensors. To change how this data is displayed: Locate the button on the back panel. The text instructs the user to place the

: Single press toggles between Alarm 1 and Alarm 2 modes. Holding for 2 seconds enters manual time setting mode.

Locate the battery door on the back of the clock and slide it open.